HOW TO SET THE AUTOMATIC LINE FEED FOR THE BARCODE SCANNER?

Barcode scanners are very popular in various industry sectors. For many users, it is not a problem in the simple operation, but how to set up the scanner is confusing, especially for the setting of the automatic wrap，they still does not know how to start.

In fact, the general scanner has a carriage return in the factory default mode, but in some special cases, even if the customer restores the factory settings, the barcode cannot be changed. This situation is generally caused by some special drivers on the PC side that interfere with the data transmission of the scanner. At this time we can scan the setting barcode below from top to bottom and add a carriage return. Next, let's talk about the operation of scanning the code gun to set the automatic carriage return (method / step)

1. scan the first bar code to open the setting code. You can add the terminator suffix after scanning the bar code below.

2. in the scan allows to add a terminator suffix barcode.

3. set the suffix of the terminator, and set the suffix to 0x0D.

4. finally close the setup code.